Print marketingDesignQR code basics

QR Codes on Business Cards: Size, What to Link and How to Print

A business card has room for about one good QR code. Here is how small it can go, what it should open, and the print mistakes that stop it scanning.

The Qrelux Team5 min read

A QR code on a business card solves the oldest problem with business cards: they end up in a drawer, and your number never makes it into anyone's phone. One scan and your details are saved. But a card is small, it gets printed in a hurry, and it is the format where QR codes most often fail.

How big should a QR code be on a business card?

At least 2 × 2cm (0.8 × 0.8in). Cards are scanned from 10–15cm away, and 2cm is about the smallest size every phone reads reliably at that distance. Below it, older cameras start to fail even when the code looks sharp.

What the code holds matters as much as its size. A QR code's pattern gets finer as you add data, so a code holding your whole contact card has much smaller squares than one holding a short link, at the same printed size.

What the code holdsMinimum sizeWhy
Short link (dynamic code)2 cm (0.8 in)Always a coarse, simple pattern
vCard: name, phone, email2 cm (0.8 in)A moderate amount of data
vCard with company, title, website, address2.5 cm (1 in)Dense pattern; every field adds squares
Long URL with tracking parameters2.5–3 cm (1–1.2 in)Dense pattern; shorten it instead

A standard card is about 85–90mm × 50–55mm, so a 2.5cm code fits comfortably on the back with room for a call to action. The wider rules behind these numbers are in what size a QR code should be.

What should the QR code open?

This is the decision that matters most, and it is permanent once the cards are printed. There are four sensible choices:

OptionWhat happens on scanCan change after printingBest for
vCardPhone offers to save you as a contactNoDetails that rarely change
Contact page (dynamic code)Opens a page with a Save contact button and your linksYesAnyone whose number, role or links might change
WhatsApp chatOpens a chat with you, message pre-filledOnly with a dynamic codeSales and service roles where buying happens on WhatsApp
Website or portfolioOpens your siteOnly with a dynamic codeDesigners, agencies, anyone selling their work

A vCard is the simplest: the details live in the pattern, it works offline, and it saves straight to the address book. Make one with the free vCard QR code generator. The catch is that a new number or job title means reprinting every card.

A dynamic code encodes a short link that you can repoint, so a new number means editing a page, not reprinting a box of cards. It also counts scans, which tells you whether anyone actually uses the code. Static vs dynamic QR codes explains the trade-off.

WhatsApp is worth considering in Nigeria, where a lot of business happens in chat. A code that opens a chat with you, message already typed, removes the step of saving your number first. The WhatsApp QR code generator builds one.

Where to put it on the card

  • On the back. The front carries your name and brand; the back has room for a code that isn't squeezed.
  • With a call to action next to it. "Scan to save my contact" or "Scan to chat on WhatsApp". People scan more when they know what they'll get. More on wording in QR code calls to action.
  • At least 5mm inside the trim line. Cards are cut from large sheets, and the cut can drift a millimetre or two. A code too close to the edge loses its blank border, and the border is what scanners use to find it.
  • Not across a fold. On folded cards, keep the code on one flat panel.

Business cards attract special finishes, and some of them are hard on QR codes:

  • Foil. Gold or silver foil reflects light straight into the camera. Never foil the code itself.
  • Spot UV or gloss lamination over the code. The shine causes glare under office lights. Matte lamination scans far better.
  • Embossing or debossing. Raised or pressed squares cast shadows that confuse scanners. Print the code flat.
  • Low-contrast brand colours. Gold on cream or grey on black may match your brand and fail to scan. Use a dark code on a light background.
  • A logo in the middle. On a 2cm code there is very little room for error, and a logo uses up the margin. Leave it out on cards, or make the code bigger. QR codes with a logo covers the limits.

Sending it to the printer

  1. Send the code as SVG or PDF, not a screenshot. A vector file stays sharp at any size; a pasted PNG often comes out blurry.
  2. Tell the printer the exact size, for example "QR code 25mm wide, do not resize". Print shops sometimes shrink artwork to fit a layout.
  3. Write your number in international format, +234 803…, so it saves correctly on phones abroad too.
  4. Ask for one proof and scan it with an iPhone and an Android phone, including an older one, before the full run.

If the proof won't scan, the usual causes are size, a cropped border or low contrast. Why QR codes fail to scan goes through each one.

Find out if anyone scans your card

With a dynamic code you can see how many people scanned the card, and when. Print a separate batch with its own code for a trade fair or conference, and you'll know how many of the cards you handed out turned into saved contacts, compared with cards given out day to day.

Make a free vCard code now, or create a dynamic contact code on Qrelux that you can update after the cards are printed. Free plan, no card needed.

Open the free vCard generator

Frequently asked questions

How big should a QR code be on a business card?

At least 2cm (0.8in) wide, or 2.5cm (1in) if it holds a full vCard with company, title, website and address. A short link from a dynamic code can stay at 2cm because its pattern is simpler. Keep a blank margin around it and at least 5mm from the card's edge.

How small can a QR code be on a business card?

About 2cm. Smaller codes may scan on a new phone but fail on older ones, and a business card is scanned by whatever phone the other person has. If space is tight, shorten what the code holds rather than shrinking it.

Should my business card QR code be a vCard or a link?

Use a vCard if you want people to save your details and those details rarely change: it works offline and goes straight into their contacts. Use a dynamic code linking to a contact page if your number, role or links might change, or if you want to see how many people scan.

Can I change my details after the cards are printed?

Only if the code is dynamic. A vCard code has your details fixed in the pattern, so new details mean new cards. A dynamic code points to a page you can edit, so the printed cards keep working.

Should the QR code go on the front or back of a business card?

Usually the back, with a short call to action like "Scan to save my contact". The front is for your name and brand, and the back gives the code room for its blank margin and a readable size.

Stop guessing what your printed marketing does

Dynamic QR codes let you change the destination after printing and show you every scan—when, where, and on what device.

Start for free

No credit card required

Keep reading